Posted on

TG20:13 Good Practice Guidance for Tube & Fitting Scaffolding

tG20:13 Good Practice Guidance for Tube & Fitting Scaffolding

  • The NASC’s new TG20:13 Technical Guidance offers good practice guidance for tube and fitting scaffolding.
    TG20:13 aims to raise awareness of good practice in scaffolding across the construction industry and drive up standards of scaffolding, and safety.
  • The TG20:13 ‘Suite’ of guidance is supported by the UKCG, HSE and CITB.
  • TG20:13 was published in February 2014. A pricing structure was posted on the NASC home page www.nasc.org.uk at time of publication, with discounted rates for NASC members.
  • TG20:13 is underpinned by detailed structural research and is designed to conform with the European standard for scaffolding: BS EN 12811.
  • NASC created TG20:13 for the wider industry to reduce the requirement for bespoke scaffolding design for standard scaffolding structures.
  • TG20:13 provides guidance for independent scaffold structures, birdcages, loading bays, ladder-access and free-standing towers, and chimney scaffolds. It includes features such as bridges, protection fans, inside board brackets, cantilevered platforms and pavement lifts. Floor-level lifts and double standards are addressed, and guidance is provided for the first time for structural transom units.
  • TG20:13 is comprised of four distinctive publications: two coprehensive A4 books (Operational & Design Guides) and innovative new software known as the TG20:13 e-Guide incorporating ‘TG20 Compliance Sheets’ which reduce the requirement for additional scaffold design. Also included is a pocket-sized TG20:13 User Guide

 

1. TG20:13 Operational Guide. A full-colour, brand new, 224-page guide containing detailed practical guidance for most common types of scaffolding supported by structural research and calculations. Guidance is provided for an expanded range of standard structures which includes independent scaffolding, interior birdcages, chimney stack scaffolds, loading bays, ladder-access towers, free-standing towers, lift shaft towers and putlog scaffolding. A range of TG20 ‘compliance sheets’ is included for these structures.

2. TG20:13 Design Guide. Intended predominantly for engineers and designers, this 206-page document provides technical data, commentary, and source material for use by competent and suitably qualified scaffold designers in circumstances which are outside the scope of standard solutions provided in the TG20:13 Operational Guide and TG20:13 e-Guide software.

3. TG20:13 e-Guide. Designed for Mac, PC and tablet use, making it extremely easy to check scaffolds for TG20:13 compliance digitally, with user-friendly software which will facilitate printing and circulation of details of TG20 compliant structures by email. The TG20:13 e-Guide calculates and prints compliance sheets for TG20 compliant scaffolding. It allows TG20 to incorporate a wide range of scaffolding configurations, and calculates safe heights, tie duties and leg loads.4. TG20:13 User Guide. A 32-page, full-colour pocket guide in A6 format. This document clearly summarises the requirements for TG20 compliant scaffolding and offers indispensable guidance to the scaffolding operative on-site.

tg20_docs_all_in_one_new
TG20:13 QUOTES: NASC & Construction/H&S Industry

NASC Managing Director, Robin James commented: “We are very excited about the publication of TG20:13, and appreciate the patience of our members, and the construction industry as a whole, who have been waiting for this product to be finalised. TG20:13 represents a hugely improved, more user-friendly and significantly enhanced technical guidance system. We are confident that our members, and the wider industry, will welcome this innovative product.

“The NASC has invested more than L500k into the research and development of TG20:13. We are confident that it will be a great success and will be positively received by the membership and the wider industry.”

NASC President, Kevin Ward added: “Those who have already seen the document have been amazed by the quality of the work. TG20:13 is not a rewrite, it is a completely new suite of documents. The scope of these documents has meant that it has taken longer to complete than was initially hoped. It has though been worth the wait.

“The new version of TG20 sees a ‘step change’ in our industry with regard to the design of tube and fitting scaffolds. In future our clients will be expecting either a site specific ‘TG20:13 compliance sheet’ or a ‘full temporary works scaffold design’ to be submitted as part of a scaffold plan prior to the commencement of any works, and the HSE will also be looking for this.”

NASC Immediate Past President, Rob Lynch said: “We are all very positive about TG20:13. The new e-Guide is especially exciting. It was a risk we took developing this, but it’s exceeded all our expectations. We believe that the TG20:13 e-Guide will be an essential tool for every site manager and safety consultant, and will provide an accessible and reliable reference point for assessing the safety and compliance of scaffolds.”

Heather Bryant, HM Chief Inspector of Construction for the Health & Safety Executive (HSE) said: “Falls from height remain the dominant cause of fatal and serious injuries in the construction industry. Properly designed and constructed scaffolding has a key role to play in reducing that toll of injuries.

“HSE is pleased to acknowledge that the NASC has written TG20:13 to provide a standard for traditional tube and fitting scaffolds to help industry manage safety risks effectively in the scaffolding and wider construction sector.”

Stephen Ratcliffe, Director, UK Contractors Group (UKCG) said: “We applaud and support the work of the NASC which will no doubt result in safer scaffolding structures being installed and thus reduce the frequency of scaffolding failures, which at present occur far too frequently across the industry.

“The UKCG recommend the adoption and standardised use of TG20:13 to the wider industries that utilise scaffolding structures both within and outside the construction sector.”

Those wishing to purchase a copy of TG20:13 should consult the publications section of the NASC website www.nasc.org.uk or email sales@nasc.org.uk or call 020 7822 7400.

Further information and TG20:13 auxiliary material is also available via the NASC’s social media channels:

Facebook: www.facebook.com/NASCscaffolding

Twitter: www.twitter.com/NASCscaffolding

YouTube Channel: www.youtube.com/user/NASClondon

Posted on

NASC TG20:13 Regional Seminars

NASC TG20:13 Regional Seminars

The NASC will be holding five, free TG20:13 Regional Seminars across the UK to mark the publication of the revised, industry standard Technical Guidance for tube and fitting scaffolding.

The TG20:13 regional seminars are open to principal contractors, client bodies, local authorities, health and safety consultants and scaffolding contractors. Pre-registration is required for attendance at the seminars (on a first-come first-served basis) by clicking here (seminars are now fully subscribed).

Each of the regional seminars will take place from 2.00-4.00pm and will feature two separate TG20:13 presentations. The first presentation will take the form of an introduction to TG20:13 by Terry Roberts (CADS, technical authors of TG20:13) and will highlight the main features of the revised guidance.

The second presentation will consider the implementation of TG20:13 by the scaffolding sector and the wider construction industry and will be delivered by Simon Hughes (Simian Risk). Each of the presentations will be followed by a Question and Answer session.

The two TG20:13 presentations will be followed by a shorter presentation by David Mosley (NASC Director of Training and CISRS Scheme Manager) who will update on scaffolding industry training requirements.

The event will conclude with a further brief presentation by Robin James (NASC Managing Director) who will discuss the benefits of using NASC member companies for scaffolding requirements.

Dates and locations of the NASC TG20:13 Regional Seminars

  • Tuesday 4th March, South West & South Wales region @ Battleborough Grange, Brent Knoll
  • Wednesday 5th March, Midlands region @ Aston Wood GC, Sutton Coldfield
  • Thursday 6th March, Northern & North Wales region @ Holiday Inn, Barnsley (off M1 Junction 37)
  • Thursday 13th March, Scotland & Northern Ireland region @ NCC Scotland, Inchinnan
  • Tuesday 18th March, London/SE region @ Chamber of Shipping, London SE1.

Attendance at the TG20:13 regional seminars will be strictly limited to two individuals per company/organisation at each seminar location. Those wishing to attend one of these seminars must pre-register their attendance in the first instance by completing the TG20:13 Regional Seminar pre-registration form (seminars are now fully subscribed).

Robin James (NASC Managing Director) said: “The TG20:13 regional seminars are a great opportunity to get to grips with the greatly enhanced and user-friendly revised Technical Guidance, and to learn more about CISRS training as well as the benefits of using NASC members. We are confident that representatives from the wider industry will find the seminar content extremely useful and will go away with a greater understanding of TG20:13. Subject to take-up and demand, further TG20:13 regional seminars will be conducted later on in the year.”

Robin James added we are very excited about the publication of TG20:13, and appreciate the patience of our members, and the construction industry as a whole, who have been waiting for this product to be finalised. TG20:13 represents a hugely improved, more user-friendly and significantly enhanced technical guidance system. We are confident that our members, and the wider industry, will welcome this innovative product.
TG20:13 Good Practice Guidance for Tube and Fitting Scaffolding
The new TG20:13 ‘Suite’ of guidance is supported by the UKCG, HSE and CITB, and takes the form of four distinctive publications, including two comprehensive A4 books and innovative new software known as the TG20:13 e-Guide, together with a pocket-sized User Guide:

1. TG20:13 Operational Guide. A full-colour, brand new, 224 page guide containing detailed practical guidance for most common types of scaffolding supported by structural research and calculations. Guidance is provided for an expanded range of structures which includes interior birdcages, chimney stack scaffolds, loading bays, ladder-access towers, free-standing towers, lift shaft towers and putlog scaffolding. A range of TG20:13 ‘compliance sheets’ is also included for these structures.

2. TG20:13 Design Guide. Intended predominantly for engineers and designers, this 206 page document provides technical data, commentary, and source material for use by competent and suitably qualified scaffold designers in circumstances which are outside the scope of standard solutions provided in the TG20:13 Operational Guide and TG20:13 e-Guide software.

3. TG20:13 e-Guide. Designed for Mac, PC and tablet use, making it extremely easy to check scaffolds for TG20:13 compliance digitally, with user-friendly software which will facilitate printing and circulation of details of TG20:13 compliant structures by email.

4. TG20:13 User Guide. A 32 page full colour pocket guide in A6 format, this document clearly summarises the requirements for compliant TG20:13 scaffolding and will offer indispensable guidance to the scaffolding operative.

Robin James added: “We are very excited about the publication of TG20:13, and appreciate the patience of our members, and the construction industry as a whole, who have been waiting for this product to be finalised. TG20:13 represents a hugely improved, more user-friendly and significantly enhanced technical guidance system. We are confident that our members, and the wider industry, will welcome this innovative product.

“The NASC has invested huge sums of money into the research and development of TG20:13. We are confident that it will be a huge success and will be positively received by the membership and the wider industry.”

NASC President, Kevin Ward said: “Those who have already seen the document have been amazed by the quality of the work. TG20:13 is not a rewrite, it is a completely new suite of documents. The scope of the documents has meant that it has taken longer to complete than was initially hoped. It has though been worth the wait.

“The new version of TG20 sees a ‘step change’ in our industry with regard to the design of tube & fitting scaffolds. In future our clients will be expecting either a site specific ‘TG20:13 compliance sheet’ or a ‘full temporary works scaffold design’ to be submitted as part of a scaffold plan prior to the commencement of any works – and the HSE will also be looking for this.”

NASC Immediate Past President, Rob Lynch said: “We are all very positive about TG20:13. The new e-Guide is especially exciting. It was a risk we took developing this, but it’s exceeded all our expectations. We believe that the TG20:13 e-Guide will be an essential tool for every site manager and safety consultant, and will provide an accessible and reliable reference point for assessing the safety and compliance of scaffolds.”

TG20:08 will be withdrawn on 30 June 2014.

The anticipated date of publication of the TG20:13 suite of guidance is mid February. A pricing structure for non members will be posted on the NASC home page at www.nasc.org.uk at time of publication.