£250.00
Comprehensive guidance on how to provide safe and compliant temporary edge protection for flat and sloping roofs with an angle of up to 10°.
TG1:22 provides guidance on the requirements for Class A type edge protection, constructed with tube and fittings, in compliance with BS EN 13374:2013+A1:2018, together with the basic elements of construction. This includes edge protection for flat and sloping roofs up to an angle of 10 degrees as well as for open floors. This document includes 15 No. generic design drawings, which may be used without the need for a bespoke design, provided that environmental conditions and roof/floor structures are suitable.
This guidance is available for pdf download only. Please note it is NOT an add-on to the TG20:21 ePortal and does not create compliance sheets. For a more detailed summary of TG1:22 please click here.
Please note - this guide is on back order as of 31 July 2024. We are waiting for a reprint and will send them out ASAP. The TG20 Operational Guide contains detailed practical guidance for most common types of scaffolding, supported by structural research and calculation. Guidance is provided for a range of standard structures which includes independent scaffolding, interior birdcages, chimney stack scaffolds, loading bays, ladder-access towers, free-standing towers, lift shaft towers, putlog scaffolding, exterior birdcages, tube and fitting mobile towers, tube and fitting loading bays without beams, and tied independent scaffolds with three inside boards. NASC members can purchase 10 or more copies of the TG20:21 Operational Guide book at the discounted rate of £25 per unit. To do so, please email sales@nasc.org.uk
This guide is intended to aid those who commission scaffold designs by summarising the responsibilities of each party involved at each stage of the process. It also details the requirements for preparing a design brief with information required by the Designer to enable a suitable and sufficient design to be produced, as well as outlining the design process, checking requirements and expected output information. This document is complimented by CG6: Scaffold Design. 6 pages.
A temporary roof or building is a sheeted structure designed to protect the area inside from the effects of weather, dust, etc. This guide is intended to give design and construction information to the suppliers and erectors of temporary roofs and buildings and intended for use by contractors during the building process. 56 pages
Many free-standing scaffolding structures, such as access towers, major signboards, fences and enclosures, need to be anchored to the ground, primarily to resist wind forces. Whilst all structures requiring restraint via anchoring to the ground should be subject to a bespoke design produced by a competent engineer, the guidance considers different types of anchors available and typical indicative holding capacities, the possibility of disturbing underground services, the use of guys and scaffold tube restraint. 6 pages
Please enter a postcode to search for a member:
Please complete the fields below:
