National Access & Scaffolding Confederation
We offer free delivery on orders over £10 (unless otherwise stated).
UK orders only online, for international orders please contact NASC:
The full suite of publications includes the following:
TG20:13 eGuide software, TG20:13 Design Guide (206 pages), TG20:13 Operational Guide (226 pages) and TG20 Pocket Guide (32 pages).
To buy the TG20:13 eGuide on its own, you need to have purchased the TG20:13 Full Suite before.
The TG20:13 eGuide may only be used on one PC/laptop/Android device at any given time.
Price shown includes VAT and £12 P&P.
Intended predominantly for engineers and designers, this A4 sized 206-page document provides technical data, commentary, and source material for use by competent and suitably qualified scaffold designers in circumstances which are outside the scope of standard solutions provided in the TG20:13 Operational Guide and TG20:13 e-Guide software. (Price shown includes £6 Postage & Packaging)
An A4 full-colour, brand new, 224-page guide containing detailed practical guidance for most common types of scaffolding supported by structural research and calculation. Guidance is provided for an expanded range of standard structures which includes independent scaffolding, interior birdcages, chimney stack scaffolds, loading bays, ladder-access towers, free-standing towers, lift shaft towers and putlog scaffolding. A range of TG20 ‘compliance sheets’ is included for these structures. (Price shown includes £6 Postage & Packaging)
This guidance note is concerned with advice for the safe erection, use and dismantling of temporary suspended chutes intended for the conveyance of waste construction materials. The guidance covers chutes constructed of detachable sections made of metal or non-metallic material, attached to scaffolding.
TG4:19 had amendments predominantly in relation to the orientation of ring bolts where current thinking is that settlement is probably greater than side wind loads so reduces potential shear loads on the bolt. Other minor changes were cosmetic. A recent update in April 2019 saw the removal of one reference only when the guidance was reissued as TG4:19.
BS2482:2009 defines both visual and machine strength grading standards for 38mm x 225mm boards supported at 1.2m spans and 63mm x 225mm boards supported at 2.5m spans; and machine strength grading standards only for 38mm x 225mm boards supported at 1.5m spans. This guidance is reviewed on the basis of removing A grade boards that should not exist. A visually graded board is still a BS2482 product and should be marked as such on the end band.
This document aims to give advice on 38x225 BS 2482:2009 1.5 m support span boards | 38x225 BS 2482:2009 1.2m support span boards | 63x225 BS 2482:2009 2.5m support span boards | 38x225 BS 2482:1981 1.5 m support span boards.
Updated 2015 version is a change of date only. Scaffold board nail plates are specially stamped toothed strips of galvanised steel that can be used to help prevent scaffold boards developing splits, or in repairing scaffold boards that have split. This guidance gives details on the manufacture and installation of Nail Plates.
Please enter a postcode to search for a member: