£250.00
Comprehensive guidance on how to provide safe and compliant temporary edge protection for flat and sloping roofs with an angle of up to 10°.
TG1:22 provides guidance on the requirements for Class A type edge protection, constructed with tube and fittings, in compliance with BS EN 13374:2013+A1:2018, together with the basic elements of construction. This includes edge protection for flat and sloping roofs up to an angle of 10 degrees as well as for open floors. This document includes 15 No. generic design drawings, which may be used without the need for a bespoke design, provided that environmental conditions and roof/floor structures are suitable.
This guidance is available for pdf download only. Please note it is NOT an add-on to the TG20:21 ePortal and does not create compliance sheets. For a more detailed summary of TG1:22 please click here.
This guidance gives details of the stress corrosion cracking (SCC) that can occur in certain materials when subjected to tensile stress and specific corrosive environments. Although rare in our industry, it can lead to unexpected sudden failure of certain metals. Whilst chemical environments and alloys are highly specific, this guidance explains the process by which SCC can occur and advises that specialist advice may be needed where SCC is possible or has occurred in the past. This guidance is available for pdf download only.
2 pages
A temporary roof or building is a sheeted structure designed to protect the area inside from the effects of weather, dust, etc. This guide is intended to give design and construction information to the suppliers and erectors of temporary roofs and buildings and intended for use by contractors during the building process. 56 pages
The TG20 Operational Guide contains detailed practical guidance for most common types of scaffolding, supported by structural research and calculation. Guidance is provided for a range of standard structures which includes independent scaffolding, interior birdcages, chimney stack scaffolds, loading bays, ladder-access towers, free-standing towers, lift shaft towers, putlog scaffolding, exterior birdcages, tube and fitting mobile towers, tube and fitting loading bays without beams, and tied independent scaffolds with three inside boards. NASC members can purchase 10 or more copies of the TG20:21 Operational Guide book at the discounted rate of £25 per unit. To do so, please email sales@nasc.org.uk
Scaffold board nailplates are specially stamped toothed strips of galvanised steel that can be applied to new or used boards to prevent or to repair existing end splits. Experience gained over many years by the scaffold industry indicates that the service life of a board can be substantially extended if nailplates are fitted. This revised and updated version contains additional information and guidance on the specification and fitting of nailplates.
Please enter a postcode to search for a member:
Please complete the fields below:
