This guide is intended to aid those who commission scaffold designs by summarising the responsibilities of each party involved at each stage of the process. It also details the requirements for preparing a design brief with information required by the Designer to enable a suitable and sufficient design to be produced, as well as outlining the design process, checking requirements and expected output information. This document is complimented by CG6: Scaffold Design. 6 pages.
Out of stock
This guidance identifies the specification and test requirements and minimum markings to be found on all EN74-1 scaffold fittings. The 2015 update sees no change other than dates. EN74-1 is unlikely to change in the next four years.
This guidance gives details of the stress corrosion cracking (SCC) that can occur in certain materials when subjected to tensile stress and specific corrosive environments. Although rare in our industry, it can lead to unexpected sudden failure of certain metals. Whilst chemical environments and alloys are highly specific, this guidance explains the process by which SCC can occur and advises that specialist advice may be needed where SCC is possible or has occurred in the past.
This document aims to give advice on 38x225 BS 2482:2009 1.5 m support span boards | 38x225 BS 2482:2009 1.2m support span boards | 63x225 BS 2482:2009 2.5m support span boards | 38x225 BS 2482:1981 1.5 m support span boards.
In an ideal world all working platforms should contain no gaps or holes. This updated guidance is a simplification of the previous 2003 issue regarding working platforms, which have additional requirements over those that are normally provided on an access scaffold. Quality and the thickness of ply used are integral.
Please enter a postcode to search for a member: